Plastepur Treatment Systems

Plastepur Domestic Treatment Systems

It is used by natural leaking method in the houses outside the residential area.

Profile-form plastic cesspools for all kinds of wastewater,
Screwable chimney,
Combined independent anaerobic pretreatment (settler + clarifier)
Drainage-free and/or drained aerobic treatment,
CE marked settlers and clarifiers
Discharge collecting chambers,
Oil retaining systems,
Vertical sand filtration with artificial hand unloading and drained on the non-permeable surface,
Superior features:High strength for large capacities,
It does not become deformed and has internal / external double-welded, double-wall module,
Thick profiled and honeycombed outer surface,
Thick and smooth inner surface,Lightness, the use of smaller vehicles for transportation,Less excavation and filling; simple and quick application,

The introduction of rough and domestic wastewater from an inlet mechanism (IN) providing access to de-clogging and pressure reduction
Domestic wastewater separation zone including lighter than water and heavier than water
Sludge bed which is deposited and is in the anaerobic fermentation stage
Oil and floating matter layer
Gas accumulation chamber
The clarified water as a result of the settling and integrated demountable pre-filter with clogging alarm and demountable and stainless, integrated filtration filter, the separation zone of the suspended materials with double separator equipped with "performance".
Transfer of pre-treated domestic wastewater to final aerobic treatment (diffusion, filter bed...)
Ventilation hole (VH) with a diameter of at least 100 mm for stable evacuation of fermentation gases over the roof and for evacuation through ventilation inlet at the device inlet.